Mirage Roller Blinds offer a versatile, decorative and cost effective solution to window shading, with a range of fabrics including prints, translucent, textured, dim-out and blockout products available.

The Mirage Roller Systems uses a spring unit (also known as a Lock Action Spring) as an alternative to the Friction Clutch used in the Rollashade SGC System. Mirage tube is available in either 25 or 32mm diameter and capable of carrying up to 2kg (25mm) or 3kg (32mm) load.

Springs are fitted to the left of the blind as installed and are operated by pulling down the blind with a cord attached to the centre of the bottom lath. The blind will stop at any desired point by use of a ratchet. To raise the blind, sharply pull down and slowly let the blind ascend. The spring is locked or released by the action of ball bearings moving in and out of locations in the mechanism.

Mirage Roller Blinds are particularly suitable to situations where safety is paramount, as there is no continuous, free-hanging cord/chain loop to pose a potential hazard.